How To Record Digital Tv With Vcr While Watching Another Channel How To Hook Up DTV Converter Box To VCR?

How to hook up DTV Converter Box to VCR? - how to record digital tv with vcr while watching another channel

Can I be a VCR, TV tuner has a digital decoder converter and yet able to record one channel while watching another? I've heard that you 2 converter boxes will need to record on one channel while watching another. I thought maybe I could use a splitter box and antenna to the TV? If your TV has a digital tuner built into the need for a second box?

3 comments:

Stephen P said...

You only need a converter. It is true that we get a splinter in the antenna cable to the box should be able to share the feed conversion and signal independent antennas, digital television.

Using The only reason I can imagine a converter, if the second is a digital TV tuner in more than a few years and just been from the beginning.

The tuner in the converter, such as the Zenith / Insignia models are so good, picking up signals and high-definition televisions more expensive. If you get a better reception with the converter first, you may want a second to replace their digital television.

Walter K said...

Since the features already have a digital TV tuner, you just need a converter for videos. If you do not), the VCR, an IR blaster that can control a cable box (the DTV converter in this case is to be able to use the timer on the video to switch channels and appear in the folder. Without the IR blaster, you can save the last selected channel in the DTV converter box. It also features automatic shut note built in converters. They could be recorded were looking for.
With the recorder IR Blaster, you should also make sure that your VCR, you know the codes to send control signals. For example, I have learned that the converter boxes APEX the same codes as Toshiba to use TV.
If you do not believe anything with video recording (only play tapes for rental), then you can don & #039; need a converter for video either. And all this assumes that your program Soruco an antenna, cable or antenna is not.

Frankybo... said...

You will need two separate devices to tune in two different samples

Post a Comment